Speed - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
29
641
Parameters
•
console—Enters the terminal line mode.
•
telnet—Configures the device as a virtual terminal for remote access
(Telnet).
•
ssh—Configures the device as a virtual terminal for secured remote access
(SSH).
Command Mode
Global Configuration mode
Example
The following example configures the device as a virtual terminal for remote
(Telnet) access.
switchxxxxxx(config)#
switchxxxxxx(config-line)#
29.4 speed
To set the line baud rate, use the speed command in Line Configuration mode.
To restore the default configuration, use the no form of this command.
Syntax
bps
speed
no speed
Parameters
bps—Specifies the baud rate in bits per second (bps). Possible values are 4800,
9600, 19200, 38400, 57600, and 115200.
Default Configuration
The default speed is 115200 bps.
line telnet
OL-32830-01 Command Line Interface Reference Guide
Line Commands
Advertisement
Table of Contents
