Cisco 300 Series Cli Manual page 549

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

The policies cannot be attached by the

ipv6 neighbor binding attach-policy (VLAN mode)

vlan_default policy is attached by default to a VLAN, if no other policy is attached

to the VLAN. The port_default policy is attached by default to a port, if no other

policy is attached to the port.

You can define a policy using the ipv6 neighbor binding policy command multiple

If an attached policy is removed, it is detached automatically before removing.

The following commands can be configured into IPv6 Neighbor Binding Policy

Configuration mode:

device-role (Neighbor Binding)

logging binding

address-config

address-prefix-validation

Example 1—The following example defines a Neighbor Binding policy named

policy1, places the router in Neighbor Binding Policy Configuration mode, enables

logging, and defines the port as internal:

switchxxxxxx(config)#

switchxxxxxx(config-nbr-binding)#

switchxxxxxx(config-nbr-binding)# exit

Example 2—The following example defines a Neighbor Binding policy named

policy1 using multiple steps:

switchxxxxxx(config)#

switchxxxxxx(config-nbr-binding)#

switchxxxxxx(config)#

ipv6 neighbor binding attach-policy (port

ipv6 neighbor binding policy policy1

device-role internal

logging binding

ipv6 neighbor binding policy policy1

device-role internal

ipv6 neighbor binding policy policy1

OL-32830-01 Command Line Interface Reference Guide

IPv6 First Hop Security

command. The