Eee Commands; Eee Enable (Global) - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

EEE Commands

OL-32830-01 Command Line Interface Reference Guide

To enable the EEE mode globally, use the eee enable Global Configuration

command. To disable the mode, use the no format of the command.

no eee enable

This command has no arguments or keywords.

Default Configuration

EEE is enabled.

Command Mode

Global Configuration mode

User Guidelines

In order for EEE to work, the device at the other end of the link must also support

EEE and have it enabled. In addition, for EEE to work properly, auto-negotaition

must be enabled; however, if the port speed is negotiated as 1Giga, EEE always

works regardless of whether the auto-negotiation status is enabled or disabled.

If auto-negotiation is not enabled on the port and its speed is less than 1 Giga, the

EEE operational status is disabled.

switchxxxxxx(config)#