Match - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
39
Quality of Service (QoS) Commands
Syntax
class-map-name
show class-map [
]
Parameters
class-map-name—Specifies the name of the class map to be displayed.
Command Mode
Privileged EXEC mode
Example
The following example displays the class map for Class1.
switchxxxxxx(config)# show class-map
Class Map matchAny class1
Match access-group mac
39.6 match
Use the match Class-map Configuration mode. command to bind the ACLs that
belong to the class-map being configured. Use the no form of this command to
delete the ACLs.
Syntax
acl-name
match access-group
acl-name
no match access-group
Parameters
acl-name—Specifies the MAC, IP ACL name., or IPv6 ACL name
Default Configuration
No match criterion is supported.
User Guidelines
This command is available only when the device is in QoS advanced mode.
747
OL-32830-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
