Table of Contents
Advertisement
IPv6 First Hop Security
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
The policies cannot be attached by the
mode)
or
ipv6 neighbor binding attach-policy (VLAN mode)
vlan_default policy is attached by default to a VLAN, if no other policy is attached
to the VLAN. The port_default policy is attached by default to a port, if no other
policy is attached to the port.
You can define a policy using the ipv6 neighbor binding policy command multiple
times.
If an attached policy is removed, it is detached automatically before removing.
The following commands can be configured into IPv6 Neighbor Binding Policy
Configuration mode:
•
device-role (Neighbor Binding)
•
logging binding
•
max-entries
•
address-config
•
address-prefix-validation
Examples
Example 1—The following example defines a Neighbor Binding policy named
policy1, places the router in Neighbor Binding Policy Configuration mode, enables
logging, and defines the port as internal:
switchxxxxxx(config)#
switchxxxxxx(config-nbr-binding)#
switchxxxxxx(config-nbr-binding)#
switchxxxxxx(config-nbr-binding)# exit
Example 2—The following example defines a Neighbor Binding policy named
policy1 using multiple steps:
switchxxxxxx(config)#
switchxxxxxx(config-nbr-binding)#
switchxxxxxx(config-nbr-binding)#
switchxxxxxx(config)#
ipv6 neighbor binding attach-policy (port
ipv6 neighbor binding policy policy1
device-role internal
logging binding
ipv6 neighbor binding policy policy1
device-role internal
exit
ipv6 neighbor binding policy policy1
29
command. The
672
Advertisement
Table of Contents
