Table of Contents
Advertisement
Power over Ethernet (PoE) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Example
The following example clears the monitored statistics for gi11.
switchxxxxxx#
clear power inline monitor consumption gi11
45.16 show power inline monitor consumption
To display the average monitored power consumption info, use the show power
inline monitor consumption Privileged EXEC mode command
Syntax
show power inline monitor consumption [
|weeks}
Parameters
•
interface-id
— (Optional) Specifies an interface ID. The interface ID must be
an Ethernet port. If interface ID is not specified total device PoE
consumption info will be displayed.
•
minutes —Average minute consumption. Displays the last 60 samples,
sampled every 60 seconds (every round minute according to system time)
•
hours —Average hour consumption. Displays the last 24 samples, sampled
every 60 minutes (every round hour according to system time).
•
days —Average daily consumption. Displays the last 7 samples, sampled
every 24 hours (midnight to midnight according to system time).
•
weeks —Average Weekly Consumption. Displays the last 52 samples,
sampled every 7 days (midnight Saturday to midnight Saturday according
to system time).
Default Configuration
This command has no default settings.
interface-id
] {minutes
45
|
h ours | days
908
Advertisement
Table of Contents
