Table of Contents
Advertisement
67
1275
The following protocol names are reserved for Ethernet Encapsulation:
•
ip
•
arp
•
ipv6
•
ipx
Example
The following example maps the IP protocol to protocol group number 213.
switchxxxxxx(config)#
switchxxxxxx(config-vlan)#
67.21 switchport general map protocols-group
vlan
Use the switchport general map protocols-group vlan Interface Configuration
mode command to forward packets based on their protocol, otherwise known as
setting up a classifying rule. This command forwards packets arriving on an
interface containing a specific protocol to a specific VLAN. Use the no form of this
command to stop forwarding packets based on their protocol.
Syntax
switchport general map protocols-group
no switchport general map protocols-group
Parameters
•
group
—Specifies the group number as defined in map protocol
protocols-group command (range: 1–65535).
•
vlan-id
—Defines the VLAN ID in the classifying rule.
Default Configuration
N/A
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
Virtual Local Area Network (VLAN) Commands
vlan database
map protocol ip protocols-group
group
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
213
vlan-id
vlan
group
Advertisement
Table of Contents
