Eee Commands; Eee Enable (Global); Eee Enable (Interface) - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
EEE Commands
78-21075-01 Command Line Interface Reference Guide
26.1
eee enable (global)
Use the eee enable Global Configuration command to enable the EEE mode
globally. Use the no format of the command to disable the mode.
Syntax
eee enable
no eee enable
Default Configuration
EEE is enabled.
Command Mode
Global Configuration mode
User Guidelines
In order for EEE to work, the device at the other end of the link must also support
EEE and have it enabled. In addition, for EEE to work properly, Auto-Negotaition
must be enabled; however, if the port speed is negotiated as 1Giga, EEE always
works regardless of the auto-negotiation status (meaning enable or disable).
If Auto-Negotiation is not enabled on the port and its speed is less than 1 Giga, the
EEE Operational status is disabled..
Example
switchxxxxxx(config)#eee enable
26.2
eee enable (interface)
Use the eee enable Interface Configuration command to enable the EEE mode on
an Ethernet port. Use the no format of the command to disable the mode.
26
385
Advertisement
Table of Contents
