Table of Contents
Advertisement
36
783
gi12
TX
PD, SN
gi13
RX,TX
PD, SN, SD, SC
gi14
RX,TX
D,
Example 2 - Display LLDP configuration for port 1.
switchxxxxxx#
show lldp configuration gi11
State: Enabled
Timer: 30 Seconds
Hold multiplier: 4
Reinit delay: 2 Seconds
Tx delay: 2 Seconds
Notifications interval: 5 seconds
LLDP packets handling: Filtering
Chassis ID: mac-address
Port State
Optional TLVs
---- ---------- --------------
gi11
RX, TX
PD, SN, SD, SC, 4W
802.3 optional TLVs: 802.3-mac-phy, 802.3-lag, 802.3-max-frame-size
802.1 optional TLVs
PVID: Enabled
PPVIDs: 0, 1, 92
VLANs: 1, 92
Protocols: 802.1x
The following table describes the significant fields shown in the display:
Field
Description
Timer
The time interval between LLDP updates.
Hold multiplier
The amount of time (as a multiple of the timer interval)
that the receiving device holds a LLDP packet before
discarding it.
Reinit timer
The minimum time interval an LLDP port waits before
re-initializing an LLDP transmission.
Link Layer Discovery Protocol (LLDP) Commands
172.16.1.1
None
SN, SD, SC
automatic
Address
-----------
72.16.1.1
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Disabled
Disabled
Disabled
Notifications
-----------
Disabled
Advertisement
Table of Contents
