Option - Cisco 300 Series Cli Manual

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

Command Mode

DHCP Pool Host Configuration mode

DHCP Pool Network Configuration mode

Default Configuration

No time server name is defined.

User Guidelines

The time server's IP address should be on the same subnet as the client subnet.

The following example specifies 10.12.1.99 as the time server IP address.

Console(config-dhcp)#

53.17 option

Use the option DHCP Pool Configuration mode command to configure the DHCP

server options.

Use the no form of this command to remove the options.

code {ascii ascii-string | hex hex-string | ip ip-address}

code ip-address1

option ip-list

code—Specifies the DHCP option code.

ascii ascii-string—Specifies an NVT ASCII character string. ASCII character

strings, which contain white space, must be delimited by quotation marks.

hex hex-string—Specifies dotted hexadecimal data: Each byte in

hexadecimal character strings is two hexadecimal digits. Bytes are

separated by a period or colon.

ip ip-address—Specifies an IP address.

ip-list—Specifies that a list of IP addresses immediately follows the option

78-21075-01 Command Line Interface Reference Guide

DHCP Server Commands