Netbios-Name-Server; Netbios-Node-Type - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
53
882
Example
The following example specifies yahoo.com as the DHCP client domain name
string.
Console(config-dhcp)#
53.11 netbios-name-server
Use the netbios-name-server DHCP Pool Configuration mode command to
configure the NetBIOS Windows Internet Naming Service (WINS) servers that are
available to Microsoft DHCP clients.
Use the no form of this command to remove the NetBIOS name server.
Syntax
netbios-name-server
no netbios-name-server
Parameters
ip-address—Specifies the NetBIOS WINS name server IP address.
Command Mode
DHCP Pool Host Configuration mode
DHCP Pool Network Configuration mode
Default Configuration
No bios server is defined.
Example
The following example specifies the IP address of a NetBIOS name server
available to the DHCP client.
Console(config-dhcp)#
53.12 netbios-node-type
Use the netbios-node-type DHCP Pool Configuration mode command to configure
the NetBIOS node type for Microsoft DHCP clients.
Use the no form of this command to return to default.
domain-name
yahoo.com
ip-address
netbios-name-server
78-21075-01 Command Line Interface Reference Guide
DHCP Server Commands
10.12.1.90
Advertisement
Table of Contents
