Cisco 300 Series Cli Manual page 742

Small business 300 series managed switches command line interface guide release 1.3

Hide thumbs Also See for 300 Series:

Table of Contents

show ipv6 interface tunnel 1

Tunnel 1 is up/up

IPv6 is enabled, link-local address is FE80::0DB8:12AB:FA01

Global unicast address(es):

Ipv6 Global Address

2000:0DB8::2/64 (ANY)

2000:0DB8::2/64

2000:1DB8::2011/64

Joined group address(es):

FF02::1:FF11:6770

is 1500 bytes

ICMP error messages limited interval is 100ms; Bucket size is 10 tokens

ND DAD is enabled, number of DAD attempts: 1

ND reachable time is 30000 milliseconds

MLD Version is 2

Tunnel mode is ISATAP

Tunnel Local IPv4 address : 10.10.10.1(VLAN 1)

ISATAP Router DNS name is isatap

Field Descriptions:

vlan 1 is up/up—Indicates the interface status: administrative/operational.

IPv6 is enabled, stalled, disabled (stalled and disabled are not shown in

sample output)—Indicates that IPv6 is enabled, stalled, or disabled on the

interface. If IPv6 is enabled, the interface is marked "enabled." If duplicate

address detection processing identified the link-local address of the

interface as being a duplicate address, the processing of IPv6 packets is

disabled on the interface and the interface is marked "stalled." If IPv6 is not

enabled, the interface is marked "disabled."

link-local address—Displays the link-local address assigned to the

IPv6 Router Commands

78-21075-01 Command Line Interface Reference Guide