Ip Igmp Snooping Vlan Static - Cisco 300 Series Cli Manual
Small business 300 series managed switches
command line interface guide release 1.3
Hide thumbs
Also See for 300 Series:
- Cli manual (1117 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
IGMP Snooping Commands
78-21075-01 Command Line Interface Reference Guide
User Guidelines
A port that is a forbidden mrouter port cannot be a Multicast router port (i.e. cannot
be learned dynamically or assigned statically).
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 1 forbidden mrouter interface
38.6
ip igmp snooping vlan static
Use the ip igmp snooping vlan static Global Configuration mode command to
register an IP-layer Multicast address to the bridge table, and to add static ports to
the group defined by this address. Use the no form of this command to remove
ports specified as members of a static Multicast group.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameter
•
vlan-id
vlan
—Specifies the VLAN.
•
ip-address
static
•
nterface-list
interface i
from one of the following types: Ethernet port or Port-channel.
Default Configuration
No Multicast addresses are defined.
Command Mode
Global Configuration mode
User Guidelines
Static Multicast addresses can only be defined on static VLANs.
You can execute the command before the VLAN is created.
vlan-id
ip-address [
static
vlan-id
ip-address [
static
—Specifies the IP Multicast address.
—Specifies a list of interfaces. The interfaces can be
interface-list]
interface
interface-list]
interface
38
gi1
639
Advertisement
Table of Contents
