Table of Contents
Advertisement
32
739
Syntax
vpt
iscsi qos {[vpt
] [dscp
no iscsi qos
Parameters
•
vpt
vpt
—Specifies a value of the VLAN Priority Tag (VPT) that iSCSI tagged
frames are assigned (Range: 0–7).
•
dscp
dscp
—Specifies the Differentiated Services Code Point (DSCP) that
iSCSI frames are assigned. (Range: 0–63).
•
queue
queue
—Specify the outgoing queue that iSCSI frames are sent
(Range: 1–8).
Default Configuration
•
VPT is not changed.
•
DSCP is not changed.
•
Queue—7
Command Mode
Global Configuration mode
User Guidelines
Use the iscsi qos command, to change the default quality of service profile
applying to iSCSI flows.
Note. At least one parameter is mandatory
Example
The following example configures the default quality of service profile applying to
iSCSI flows:
switchxxxxxx(config)#
dscp
queue
] [queue
iscsi qos vpt 6 queue 8
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
iSCSI QoS Commands
]}
Advertisement
Table of Contents
