Attaching A Chassis Ground Connection - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Attaching a Chassis Ground Connection

The following imave shows the locations at which to attach the front rack mount brackets to the Cisco ASR 1002-X

Router in a rack.

Figure 158: Chassis Rack Mount Bracket Ear Holes for the Cable Management Brackets

Using the bottom rack mount ear hole, insert the screw through cable management bracket and into the chassis rack

Figure 158: Chassis Rack Mount Bracket Ear Holes for the Cable Management Brackets, on page

What to Do Next

This completes the procedure for installing the cable management brackets on the chassis.

Connecting the Cisco ASR 1002-X chassis to ground is required for all DC-powered installations and

AC-powered installation where compliance with Telcordia grounding requirements is necessary.

The dual-lug chassis ground stud must be installed and all the cards and filler plates must be fully inserted,

screwed in, and earthed to prevent a potential hazard in a telecom line.

Have the recommended tools and supplies available before you begin this procedure.

Cisco ASR 1000 Series Router Hardware Installation Guide

Secure the cable

management top screw and

bottom to this ear hole

Cable-management bracket

Cisco ASR 1002-X Router Overview and Installation

Front rack mount bracket

Show Quick Links

Table of Contents