Cisco Asr 1013 Router; Removing And Replacing The Dimm Memory Modules On The Cisco Asr 1006 Router And The Cisco Asr 1013 Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

Cisco ASR1000-RP1

You might need to upgrade the DIMM for the following reasons:

• You have upgraded to a new Cisco IOS feature set or release that requires more memory.

• You are using very large routing tables or many protocols.

This section contains the following topics:

Removing and Replacing the DIMM Memory Modules on the Cisco ASR 1006

Router and the Cisco ASR 1013 Router

The Cisco ASR 1006 Router and the Cisco ASR 1013 Router have redundant RPs. The following is an

overview of the steps to remove and replace the DIMM memory modules on these routers:

Cisco ASR1000-RP2

• Up to 4 DIMMs with up to two DIMMs per

• Allowable memory options of 4 GB, 8 GB, or

Cisco ASR 1000 Series Router Hardware Installation Guide

Show Quick Links

Table of Contents

Troubleshooting