Installing The Chassis Using The Forward Rack-Mount Brackets - Cisco ASR 1013 Hardware Installation Manual
Asr 1000 series
Hide thumbs
Also See for ASR 1013:
- Installation manual (42 pages) ,
- Quick start manual (37 pages) ,
- Replacing (120 pages)
Table of Contents
Advertisement
Installing the Cisco ASR 1013 Router in a Rack
c) Insert a screw in the middle of the rack-mount bracket on both sides of the chassis.
d) Repeat these steps for the other side of the chassis.
As a result of using the specified rack-mount bracket ear holes, the cable-management bracket can be easily
Note
attached to the rack-mount bracket after the chassis is installed in the rack.
Step 8
Tighten all screws on each side to secure the chassis to the equipment rack.
What to Do Next
Using Rear Rack-Mount Brackets
Installing the Chassis Using the Forward Rack-Mount Brackets
To install the chassis in the rack using the rear rack-mount brackets, perform the following steps:
SUMMARY STEPS
1. On the chassis, ensure that all screw fasteners on the installed components are securely tightened.
2. Make sure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are
engaged or that the rack is otherwise stabilized. See the next sections on the types of racks you can use to
install the chassis.
3. (Optional) Install a shelf in the rack to support the Cisco ASR 1013 Router. If you use a shelf, this will
help support the chassis while you secure it to the rack.
4. With two people, lift the chassis into position between the rack posts.
5. Align the mounting bracket holes with the rack post holes and attach the chassis to the rack.
6. Position the chassis until the rear rack-mounting flanges are flush against the mounting rails on the rack.
7. Hold the chassis in position against the mounting rails and insert all screws that were shipped in the
accessory kit.
8. Tighten all screws on each side to secure the chassis to the equipment rack.
DETAILED STEPS
Step 1
On the chassis, ensure that all screw fasteners on the installed components are securely tightened.
Step 2
Make sure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the brakes are engaged or that
the rack is otherwise stabilized. See the next sections on the types of racks you can use to install the chassis.
Step 3
(Optional) Install a shelf in the rack to support the Cisco ASR 1013 Router. If you use a shelf, this will help support the
chassis while you secure it to the rack.
Step 4
With two people, lift the chassis into position between the rack posts.
Step 5
Align the mounting bracket holes with the rack post holes and attach the chassis to the rack.
If you are using a shelf then raise the chassis to the level of the shelf. Let the bottom of the chassis rest on the
Note
brackets, but continue to support the chassis.
Step 6
Position the chassis until the rear rack-mounting flanges are flush against the mounting rails on the rack.
Step 7
Hold the chassis in position against the mounting rails and insert all screws that were shipped in the accessory kit.
Step 8
Tighten all screws on each side to secure the chassis to the equipment rack.
Cisco ASR 1000 Series Router Hardware Installation Guide
380
Cisco ASR 1013 Router Overview and Installation
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
