Connecting Cables - Cisco ASR 1013 Hardware Installation Manual
Asr 1000 series
Hide thumbs
Also See for ASR 1013:
- Installation manual (42 pages) ,
- Quick start manual (37 pages) ,
- Replacing (120 pages)
Table of Contents
Advertisement
Cisco ASR 1002-F Router Overview and Installation
The following figure shows the Cisco ASR 1002-F Router integrated RP console and auxiliary port connection.
Figure 143: Cisco ASR 1002-F Router Integrated RP Console and Auxiliary Port Connection
1
Step 2
Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 cable to the RJ-45
adapter (see the above figure).
Step 3
Connect the adapter to your video terminal to complete the cable connection.
Step 4
Power on your video terminal.
Step 5
Configure your video terminal to match the following default console port settings: 9600 baud, 8 data bits, no parity
generation or checking, 1 stop bit, and no flow control
What to Do Next
Go to the "Connecting Cables" section to continue the installation.
Connecting Cables
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002-F Router:
• To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
• Verify all cabling limitations (particularly distance) before powering on the system
Console port (CON)
.
2
Cisco ASR 1000 Series Router Hardware Installation Guide
Connecting Cables
Auxiliary port (AUX)
315
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
