Cisco ASR 1013 Hardware Installation Manual page 191

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1006 Router Overview and Installation

The following image shows the router installed on a four-post rack.

Figure 44: Installing the Cisco ASR 1006 Router in a Four-Post Equipment Rack

When handling the chassis, always follow proper lifting practices. See the

on page 5-23

Inner clearance (the width between the inner sides of the two posts or rails) must be at least 19 inches

(48.26cm). The height of the chassis is 10.45 inches (26.543 cm). Airflow through the chassis is from

front to back.

Make sure the rack is stabilized.

Four-post equipment rack

Cisco ASR 1006 rear

rack-mount brackets

"Chassis-Lifting Guidelines" section

Cisco ASR 1000 Series Router Hardware Installation Guide

Four-Post Rack Installation

Cisco ASR 1006 front

rack-mount brackets

Four-post equipment rack

Show Quick Links

Table of Contents

Troubleshooting