Cisco Asr 1002 Router +24 Vdc Power Supply Leds And Connector - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1002 Router +24 VDC Power Supply

The +24 VDC power supply uses a spring-loaded terminal block. The input terminal block requires maximum

8AWG multi-strand wiring to support input current. The terminal block is compliant with safety agencies'

guidelines and electrical requirements of the supply. Use the tie wraps to dress the input cable wires; there

are two tie wrap tabs on the +24 VDC power supply. The +24 VDC power supply unit is secured into the

system chassis with two captive screws mounted on the faceplate.

Cisco ASR 1002 Router +24 VDC Power Supply LEDs and Connector

The following figure shows the +24 VDC power supplies at the rear of the Cisco ASR 1002 Router. The Cisco

ASR 1002 Router supports two +24 VDC power supplies.

Figure 18: Cisco ASR 1002 Router Rear View With +24 VDC Power Supply

Cisco ASR 1000 Series Router Hardware Installation Guide

+24 VDC terminal block

Positive (+) lead

Negative (-) lead

Ground (GND) lead

Power supply LEDs

Cisco ASR 1000 Series Routers Component Overview

Standby/On switch

Captive fastener

Power supply tabs

+27 VDC INPUT label

Show Quick Links

Table of Contents