Connecting Power To Cisco Asr 1004 Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Connecting Power to Cisco ASR 1004 Router

The covers are an integral part of the safety design of the product. Do not operate the unit without the

covers installed. Statement 1077

When you install the unit, the ground connection must always be made first and disconnected last. Statement

Before performing any of the following procedures, ensure that power is removed from the DC circuit.

Statement 1003

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Statement 1030

This section provides the procedures for connecting AC-input and –48 VDC input power to your Cisco ASR

1004 Router.

The –48 VDC power supply for the Cisco ASR 1006, ASR 1004, and ASR 1002 routers operate at individual

specifications. The following table shows the common input ranges and circuit breaker requirements.

Table 50: Cisco ASR 1000 Series Router – 48 VDC Power Supply System Input Requirements

Cisco ASR 1000

Series Router

Cisco ASR 1006

Cisco ASR 1004

Cisco ASR 1002

Cisco ASR 1000 Series Router Hardware Installation Guide

System Input

Circuit Breaker

Rating (Amps)

Cisco ASR 1004 Router Overview and Installation

Show Quick Links

Table of Contents