hit counter script
Cisco ASR 1002-F Overview And Installation
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. ASR 1002-F
  6. Overview and installation
Cisco ASR 1002-F Overview And Installation

Cisco ASR 1002-F Overview And Installation

Hide thumbs Also See for ASR 1002-F:
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco ASR 1002-F Router Overview and
Installation
This chapter describes the Cisco ASR 1002-F (Fixed) Router and provides procedures for installing the Cisco
ASR 1002-F Router on an equipment shelf or tabletop or in an equipment rack, and describes how to connect
interface and power cables.
This chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Cisco ASR 1002-F Router Description

The Cisco ASR 1002-F Router is one of the Cisco ASR 1000 Series Aggregation Services Routers. The Cisco
ASR 1002-F Router supports all the general-purpose routing and security features of the Cisco ASR 1002
Router, and uses the same internal control and data-plane architecture as Cisco ASR 1002 Router.
The Cisco ASR 1002-F Router supports:
• The same features and components as the Cisco ASR 1002 Router
Connecting Cables, on page 37
Cisco ASR 1002-F Router Overview and Installation
1

Advertisement

Table of Contents
loading

Related Manuals for Cisco ASR 1002-F

Summary of Contents for Cisco ASR 1002-F

  • Page 1: Table Of Contents

    Installation This chapter describes the Cisco ASR 1002-F (Fixed) Router and provides procedures for installing the Cisco ASR 1002-F Router on an equipment shelf or tabletop or in an equipment rack, and describes how to connect interface and power cables.
  • Page 2 Ethernet Ports (4x1GE), refer to the “Modular Optics Compatibility” section in Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide . Note Only Cisco software release four code supports the Cisco ASR 1002-F Router. Do not use earlier versions of Cisco software. This section contains the following topics: Front View Figure 1: Cisco ASR 1002-F Router—Front View, on page 2...
  • Page 3 Note On the side of the Cisco ASR 1002-F Router there is an eUSB panel door and the grounding lug as shown in the “Cisco ASR 1002-F Router Chassis Ground Lug Location and eUSB Side Panel Door” figure in the Attaching a Chassis Ground Connection section.

  • Page 4: Cisco Asr 1002-F Router Components

    Two power supplies, either two AC power supplies or two DC power supplies, are accessed from the rear of the router. Caution Use only AC power supplies or DC power supplies in the Cisco ASR 1002-F Router. Do not mix power supply types. Cisco ASR 1002-F Router Slot Numbering The Cisco ASR 1002-F Router contains: •...
  • Page 5 Layer 3 forwarding, quality of service (QoS) classification, policing and shaping, security access control lists (ACLs), VPNs, load balancing, and NetFlow. The Cisco ASR 1002-ESP-F can only be used in the Cisco ASR 1002-F Router and has forwarding performance of 2.5 Gbps and does not support online insertion or removal.
  • Page 6 Port 3 Port The Cisco ASR 1002-F Router SPA has three types of LEDs: two LEDs for each port on the SPA and one STATUS LED, as shown in the following image. Figure 8: Cisco ASR 1002-F Router SPA Faceplate...
  • Page 7 Power Supplies in the Cisco ASR 1002-F Router The Cisco ASR 1002-F Router power supply consists of either an AC or DC input in a closed frame power supply with two DC voltage outputs: 12 V and 3.3 V. The AC power supply operates between 85 VAC to 264 VAC and the DC power supply operates between –40.5 VDC to –72 VDC.
  • Page 8 AC Power Supply for the Cisco ASR 1002-F Router The power supplies are installed into the rear of the chassis and are hot pluggable. The Cisco ASR 1002-F Router supports up to 588 W of input power from an infrastructure standpoint, but the initial power supply development limit is up to 470 W of output power (AC and DC input).
  • Page 9 Ground lead DC power supply LEDs Positive lead Negative lead The following table defines the Cisco ASR 1002-F Router DC power supply LEDs on the Cisco ASR 1002-F Router. Table 3: Cisco ASR 1002-F Router DC Power Supply LEDs LED Label...

  • Page 10: Installation Methods

    Power Cord-Japan, Right Angle Installation Methods The Cisco ASR 1002-F Router is designed for a standalone, two-rail 19-inch rack-mount (front rail only), or four-rail 19-inch rack-mount (front and rear rail). Although rack-mounting is the preferred method of installation for the Cisco ASR 1002-F Router, you can mount the chassis on an equipment shelf or tabletop.

  • Page 11: General Rack Installation Guidelines

    When planning your rack installation, consider the following guidelines: • The Cisco ASR 1002-F Router requires a minimum of 3.5 inches or 8.9 cm of vertical rack space. Measure the proposed rack location before mounting the chassis in the rack.

  • Page 12: Guidelines For An Equipment Shelf Or Tabletop Installation

    When installing the Cisco ASR 1002-F Router on an equipment shelf or tabletop, ensure that the surface is clean and that you have considered the following: • The Cisco ASR 1002-F Router requires at least 3 inches (7.62 cm) of clearance at the inlet and exhaust vents (the front and rear sides of the chassis).

  • Page 13: Equipment Shelf Or Tabletop Installation

    Equipment Shelf or Tabletop Installation Equipment Shelf or Tabletop Installation To mount your Cisco ASR 1002-F Router on an equipment shelf or tabletop, follow these steps: SUMMARY STEPS 1. Remove any debris and dust from the tabletop or platform, as well as the surrounding area.
  • Page 14 Cisco ASR 1002-F Router Overview and Installation Equipment Shelf or Tabletop Installation The chassis in the above image does not represent the Cisco ASR 1002-F Router. This is only an example of Note how to lift a Cisco chassis. Step 3 Attach the front rack-mount brackets.

  • Page 15: Rack-Mounting The Cisco Asr 1002-F Router

    Rack-Mounting the Cisco ASR 1002-F Router Rack-Mounting the Cisco ASR 1002-F Router The Cisco ASR 1002-F Router can be installed in an existing rack with equipment or in an empty rack with no equipment. The chassis can be mounted in two equipment rack types: •...

  • Page 16: Attaching The Chassis Rack-Mount Brackets

    4. Repeat Step 1 through Step 3 on the other side of the chassis. Use the black screws to secure the rack-mount brackets to the chassis. 5. Install the chassis in a rack. To install the Cisco ASR 1002-F Router in a rack, go to the Installing the Cisco ASR 1002-F Router in a Rack.
  • Page 17 Repeat Step 1 through Step 3 on the other side of the chassis. Use the black screws to secure the rack-mount brackets to the chassis. Step 5 Install the chassis in a rack. To install the Cisco ASR 1002-F Router in a rack, go to the Installing the Cisco ASR 1002-F Router in a Rack.
  • Page 18 The following image shows where to attach the rear rack-mount brackets to the Cisco ASR 1002-F Router. Figure 14: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1002-F Router...

  • Page 19: Installing The Cisco Asr 1002-F Router In A Rack

    For chassis rack-mount installation types, see the “Two-Post Rack Installation” or the “Four-Post Rack Installation.” Step 3 (Optional) Install a shelf in the rack to support Cisco ASR 1002-F Router. If you use a shelf, this will help support the chassis while you secure it to the rack. Step 4 Lift the chassis into position between the rack posts.
  • Page 20 Tighten all screws on each side to secure the chassis to the equipment rack. What to do next You can install your Cisco ASR 1002-F Router on a two-post or four-post rack. See the “Two-Post Rack Installation” or the “Four-Post Rack Installation.”...
  • Page 21 Ground Connection. to continue the installation. Four-Post Rack Installation The Cisco ASR 1002-F Router can be flush-mounted in a 19-inch equipment rack using the rack-mounting kit provided with your system. When handling the chassis, always follow proper lifting practices. See the “Chassis-Lifting Guidelines”...
  • Page 22 Step 1 (Optional) Install a shelf in the rack to support the Cisco ASR 1002-F Router. If you are using a shelf, raise the chassis to the level of the shelf. Let the bottom of the chassis rest on the brackets, but continue to support the chassis. Lift the chassis into the rack, grasping underneath the power supply bays.

  • Page 23: Attaching The Cable-Management Bracket

    4. Repeat Step 1 through Step 3 for the other side of the Cisco ASR 1002-F Router. DETAILED STEPS Step 1 Align the cable-management bracket to the rack-mount bracket on one side of the Cisco ASR 1002-F Router. The cable-management bracket aligns to the top hole of the chassis rack-mount bracket. Step 2 Insert one screw through the top screw hole of the cable-management bracket and into the chassis rack-mount bracket and tighten the screw using a Phillips screwdriver.

  • Page 24: Attaching A Chassis Ground Connection

    ASR 1002-F Router, on page 24). Step 4 Repeat Step 1 through Step 3 for the other side of the Cisco ASR 1002-F Router. What to do next This completes the procedure for installing the cable-management brackets on the Cisco ASR 1002-F Router.
  • Page 25 The grounding wire is always the first to be installed or connected and the last to be removed or disconnected. The following image shows the location of the ground connector on the side of the Cisco ASR 1002-F Router. Figure 18: Cisco ASR 1002-F Router Chassis Ground Lug Location and eUSB Side Panel Door...
  • Page 26 Cisco ASR 1002-F Router Overview and Installation Attaching a Chassis Ground Connection Figure 19: Attaching the Ground Wire to the Grounding Lug Ground wire Ground lug screws Grounding Chassis ground connector holes Step 3 Use the manufacturers’s recommended crimping tool to carefully crimp the wire receptacle around the wire; this step is required to ensure a proper mechanical connection.

  • Page 27: Connecting The Shared Port Adapter Cables

    Connecting the Console and Auxiliary Port Cables This section describes how to attach a cable to the Cisco integrated RP console or auxiliary ports on the Cisco ASR 1002-F Router. The Cisco ASR 1002-F Router uses RJ-45 ports for both the auxiliary port and console port to attach a console terminal.

  • Page 28: Connecting A Cable To The Management Ethernet Port

    A connection will not be established when setting up an out-of-band connection or modem connection in the auxiliary port and the console port. Connecting a Cable to the Management Ethernet Port This section describes how to attach a cable to the Cisco Management Ethernet port on the Cisco ASR 1002-F Router. Step 1 Insert an Ethernet RJ-45 cable into the MGMT ETHERNET port (see ).

  • Page 29: Connecting Power To The Cisco Asr 1002-F Router

    This section provides the procedures for connecting AC-input and DC input power to your Cisco ASR 1002-F Router. The DC power supply for the Cisco ASR 1006, Cisco ASR 1004, Cisco ASR 1002, and Cisco ASR 1002-F routers operate at individual specifications. The following table shows the common input ranges and circuit breaker requirements.
  • Page 30 Connecting AC Input Power to the Cisco ASR 1002-F Router Note All Cisco ASR 1000 Series Router AC power supplies must be connected to a branch circuit that does not exceed 20 A. Read the safety warnings before you begin.
  • Page 31 AC power supply LEDs AC power inlet To connect AC power to the Cisco ASR 1002-F Router, follow these steps: SUMMARY STEPS 1. At the rear of the router, check that the power switch is in the Off (O) position.
  • Page 32 Run the power cord below the handles of power supplies in slot 0 and slot 1. Make sure the power cord is hanging loose so that it will not be disconnected from the AC power inlet as shown in the foloiwng image. Figure 25: Cisco ASR 1002-F Router AC Power Supplies in Slot 0 and Slot 1 with Power Cord Caution Do not run the AC power cord through the power supply handles as shown in the following image.
  • Page 33 The order the leads should be connected is ground (GND), positive (+), and negative (–). The recommended branch circuit breaker for the Cisco ASR 1002-F Router DC power supply is 30 A. Use an AWG #10 wire gauge on the 30 A circuit.
  • Page 34 Positive lead Negative lead This section describes how to connect the DC power supply in the Cisco ASR 1002-F Router. Note The color coding of the DC input power supply leads depends on the color coding of the DC power source at your site.
  • Page 35 Cisco ASR 1002-F Router Overview and Installation Connecting DC Input Power to the Cisco ASR 1002-F Router Figure 28: Cisco ASR 1002-F Router DC Power Supply Terminal Block Cable Connections Ground lead with service loop and cable tie Negative lead wire...

  • Page 36: Connecting A Terminal To The Cisco Integrated Rp Console Port And Auxiliary Port

    Step 1 Connect one end of the RJ-45 cables to the serial console RJ-45 port (CON) on the Cisco integrated RP. The following figure shows the Cisco ASR 1002-F Router integrated RP console and auxiliary port connection.

  • Page 37: Connecting Cables

    Go to the “Connecting Cables” section to continue the installation. Connecting Cables Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002-F Router: • To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
  • Page 38 Cisco ASR 1002-F Router Overview and Installation Connecting Cables Cisco ASR 1002-F Router Overview and Installation...

Table of Contents