Cisco ASR 1013 Hardware Installation Manual page 424

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Recommended Tools and Supplies

The following image shows how to attach the ground lug on the Cisco ASR 1013 Router.

Figure 186: Attaching the Cisco ASR 1013 Router Ground Connection

Insert the two screws through the holes in the grounding lug as shown in

Router Ground Connection, on page

Use the Number 2 Phillips screwdriver to carefully tighten the screws until the grounding lug is held firmly to the chassis.

Do not overtighten the screws.

Connect the opposite end of the grounding wire to the appropriate grounding point at your site to ensure an adequate

chassis ground.

What to Do Next

This completes the procedure for attaching a chassis ground connection. Go to the following cabling sections

for information on attaching cables.

Cisco ASR 1000 Series Router Hardware Installation Guide

Chassis ground studs and

Grounding screws

Cisco ASR 1013 Router Overview and Installation

Figure 186: Attaching the Cisco ASR 1013

Ground symbol

Show Quick Links

Table of Contents

Troubleshooting