Connecting A Terminal To The Cisco Asr 1000 Series Rp Console Port - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Connecting a Terminal to the Cisco ASR 1000 Series RP Console Port

The following image shows the ASR1013/06-PWR-DC power supply for the Cisco ASR 1006 Router.

Figure 54: Cisco ASR 1006 Router DC Power Supply (ASR1013/06-PWR-DC) Terminal Block and Plastic Cover

Remove the tape from the circuit-breaker switch handle, and move the circuit-breaker handle to the On position.

Move the circuit breaker switch to the On position.

What to Do Next

This completes the procedure for connecting the DC power supply in the Cisco ASR 1006 Router.

Connecting a Terminal to the Cisco ASR 1000 Series RP Console

The Cisco ASR 1006 route processor has an asynchronous serial (EIA/TIA-232) RJ-45 console port labeled

CON on its front panel. You can connect this port to most types of video terminals through use of the console

cable kit that is included with your Cisco ASR 1006 Router. The console cable kit contains:

Cisco ASR 1000 Series Router Hardware Installation Guide

Negative terminal

Positive terminal

Terminal block plastic cover

Cisco ASR 1006 Router Overview and Installation

Plastic cover slotted area

Terminal block plastic cover

single screw

Show Quick Links

Table of Contents