Rack-Mounting The Cisco Asr 1004 Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Rack-Mounting the Cisco ASR 1004 Router

Make certain that the cable-management 'U' feature device has the open end pointing upwards when you attach

it to the chassis after the chassis is installed in a rack.

Figure 63: Attaching the Cable-Management Brackets to the Cisco ASR 1004 Router

Screw the cable-management bracket to each side of the rack-mount brackets already attached to the chassis. Use two

screws for each cable-management bracket. Use the package of four screws.

Check that all screws are securely tightened.

What to Do Next

You have completed a tabletop or equipment shelf chassis installation. Go to the

Connection, on page 201

The Cisco ASR 1004 Router can be installed with both front or rear rack-mount brackets.

Cisco ASR 1000 Series Router Hardware Installation Guide

Cable-management bracket

Cable-management bracket

to continue the installation.

Cisco ASR 1004 Router Overview and Installation

Chassis front rack-mount

Attaching a Chassis Ground

Show Quick Links

Table of Contents