Cisco ASR 1013 Hardware Installation Manual page 647

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

DETAILED STEPS

Place the bottom packing material section inside the bottom of the shipping container.

Use at least two people to place the Cisco ASR 1000 Series Router inside the container. Be sure that the chassis is

positioned correctly before you lower it inside the container.

Place the top packing material over the top of the Cisco ASR 1000 Series Router.

Place both accessory boxes inside the cutouts in the top section of the packing material.

Fold the outside carton down over the top of the accessory boxes and seal with packing tape.

Wrap two packaging straps tightly around the top and bottom of the package to hold the outside carton and the bottom

Do not use tape to hold the outside carton to the bottom pallet. Packaging straps must be used.

What to Do Next

This completes the procedure for repacking the shipping container.

Cisco ASR 1000 Series Router Hardware Installation Guide

Repacking the Router

Show Quick Links

Table of Contents

Troubleshooting