Chassis Rear Rack Mount Brackets - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Chassis Rear Rack Mount Brackets

The following image shows where to attach the front rack mount brackets to the Cisco ASR 1002-X Router.

Figure 154: Attaching the Front Rack Mount Brackets to the Cisco ASR 1002-X Router

Position the front rack mount bracket's top hole with the chassis, first top hole behind the side vent holes.

Insert and tighten the black screws shipped with the router on one side.

Repeat Step 1 through Step 3 on the other side of the chassis. Use the black screws to secure the rack mount brackets to

the chassis.

Install the chassis in a rack. To install the Cisco ASR 1002-X Router in a rack, see the information provided in the

Installing the Cisco ASR 1002-X Router in a Rack, on page

What to Do Next

This completes the steps for attaching the front rack mount brackets to the Cisco ASR 1002-X Router.

Chassis Rear Rack Mount Brackets

If you are rack mounting the chassis using the rear rack mount brackets, the chassis gets recessed in the rack.

To install the rear rack mount brackets on the Cisco ASR 1002-X Router, perform the following steps:

Cisco ASR 1000 Series Router Hardware Installation Guide

Front rack mount bracket ear

Front rack mount bracket

Cisco ASR 1002-X Router Overview and Installation

Front rack mount bracket

Show Quick Links

Table of Contents