Removing And Replacing The Cisco Asr1000-Rp2 Dimm Memory Modules - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

The following figure shows how the Cisco ASR 1000 Series RP DIMM module must not be handled.

Figure 241: Handling Cisco ASR 1000 Series RP DIMM Module

Slide the DIMM one side at a time. Use light insertion force and insert smoothly; but make certain the DIMM is inserted

Make sure you perform steps 3 thru 11 for both DIMMs on the RP 1 before you replace the Cisco ASR1000-RP1

in the system. Replace the Cisco ASR1000-RP1. All DIMMS must be replaced; not just one.

What to Do Next

This completes the procedure for replacing a DIMM memory module on the Cisco ASR1000-RP1.

Removing and Replacing the Cisco ASR1000-RP2 DIMM Memory Modules

Perform the following steps before you begin:

• Use an ESD-preventive wrist strap.

Removing and Replacing the Cisco ASR1000-RP2 DIMM Memory Modules

Cisco ASR 1000 Series Router Hardware Installation Guide

Show Quick Links

Table of Contents