Attaching A Chassis Ground Connection; Recommended Tools And Supplies - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Attaching a Chassis Ground Connection

Connecting the Cisco ASR 1000 Series Router to ground is required for all DC powered installations and any

AC powered installation where compliance with Telcordia grounding requirements is necessary.

The dual-lug chassis stud must be installed, the SIP and SPA must be fully inserted and screwed in and

earthed to prevent a potential hazard in a telecom line.

Have the recommended tools and supplies available before you begin this procedure.

The following tools, equipment, and supplies necessary to connect the system ground to the chassis:

• Phillips screwdriver

• 3.5 mm flat blade screwdriver (Phoenix # 1205053 or equivalent 3.5 mm flat blade)

• Dual-lug chassis ground component

• Grounding wire

The following image shows how to attach the ground lugs on the Cisco ASR 1000 Series chassis. The location

of the ground lug on Cisco ASR 1000 Series Routers may not be the same on all routers; but the ground lug

attachment instructions are similar.

Cisco ASR 1000 Series Router Hardware Installation Guide

Cisco ASR 1001 Router Overview and Installation

Show Quick Links

Table of Contents