Dot1X Guest-Vlan Enable - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
802. 1 X Commands
OL-32830-01 Command Line Interface Reference Guide
User Guidelines
Use the dot1x guest-vlan enable command to enable unauthorized users on an
interface to access the guest VLAN.
A device can have only one global guest VLAN.
The guest VLAN must be a static VLAN and it cannot be removed.
The Default VLAN cannot be configured as guest VLAN.
An unauthorized VLAN cannot be configured as guest VLAN.
The guest VLAN cannot be configured on a monitoring port.
Example
The following example defines VLAN 2 as a guest VLAN.
switchxxxxxx(config)#
switchxxxxxx(config-if)#
2.8
dot1x guest-vlan enable
Use the dot1x guest-vlan enable Interface Configuration mode command to
enable unauthorized users on the access interface to the guest VLAN. Use the no
form of this command to disable access.
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Parameters
N/A
Default Configuration
The default configuration is disabled.
Command Mode
Interface (Ethernet) Configuration mode
interface vlan
2
dot1x guest-vlan
2
52
Advertisement
Table of Contents
