Device-Role (Neighbor Binding) - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
IPv6 First Hop Security
OL-32830-01 Command Line Interface Reference Guide
•
REPL Y
•
RECONFIGURE
•
RELAY-REPL
•
LEASEQUERY-REPLY
Example
The following example defines an IPv6 DHCP Guard policy named policy 1 and
configures the port role as the server:
switchxxxxxx(config)#
switchxxxxxx(config-dhcp-guard)#
switchxxxxxx(config-dhcp-guard)#
25.8 device-role (Neighbor Binding)
To specify the role of the device attached to the port within an IPv6 Neighbor
Binding policy, use the device-role command within IPv6 Neighbor Binding Policy
Configuration mode. To return to the default, use the no form of this command.
Syntax
device-role {perimeter | internal}
no device-role
Parameters
•
perimeter—Specifies that the port is connected to devices not supporting
IPv6 First Hop Security.
•
internal—Specifies that the port is connected to devices supporting IPv6
First Hop Security.
Default Configuration
Policy attached to port or port channel: Value configured in the policy attached to
the VLAN.
Policy attached to VLAN: Perimeter.
ipv6 dhcp guard policy policy1
device-role server
exit
25
492
Advertisement
Table of Contents
