Cisco 300 Series Cli Manual page 253

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Clock Commands

Default Configuration

No time range is defined

Command Mode

Global Configuration mode

User Guidelines

After entering to Time-range Configuration mode with this command, use the

absolute and periodic commands to actually configure the time-range. Multiple

periodic commands are allowed in a time range. Only one absolute command is

If a time-range command has both absolute and periodic values specified, then

the periodic items are evaluated only after the absolute start time is reached, and

are not evaluated again after the absolute end time is reached.

All time specifications are interpreted as local time.

To ensure that the time range entries take effect at the desired times, the software

clock should be set by the user or by SNTP. If the software clock is not set by the

user or by SNTP, the time range is not activated.

switchxxxxxx(config)#

time-range http-allowed

switchxxxxxx(config-time-range)#

periodic mon 12:00 to wed 12:00

OL-32830-01 Command Line Interface Reference Guide