Cisco ASR 1013 Hardware Installation Manual page 558
Asr 1000 series
Hide thumbs
Also See for ASR 1013:
- Installation manual (42 pages) ,
- Quick start manual (37 pages) ,
- Replacing (120 pages)
Table of Contents
Advertisement
Remove and Replace the eUSB Device on the Cisco ASR 1001 Router
DETAILED STEPS
Step 1
Before you physically replace the eUSB device, create a backup of the startup-config and the boot image. For example,
to backup to an external USB flash drive, enter:
Example:
router# copy nvram:startup-config usb0
router# copy bootflash:asr1000rp1-adventerprisek9.02.01.00.122-33.XNA.bin usb0:
Step 2
Remove the power supplies from the chassis before you remove the chassis cover. For instructions about how to remove
the AC and DC power supplies from the Cisco ASR 1001 Router, see: xref sections.
Step 3
After the power supplies are removed, remove the chassis top cover and follow theses steps:
a) Loosen all top surface screws on the chassis cover, as shown in xref figure, callout number 3.
b) Loosen the three screws on the faceplate at the front of the chassis, as shown in xref figure, callout 6.
c) Using both hands, gently slide the cover forward and off of the chassis.
Note
The cover will not come off the chassis if the power supplies are installed.
d) Place the cover aside and ensure that you are wearing an antistatic device, such as a wrist strap.
Step 4
Position the chassis so that you are facing the front.
Step 5
Locate the eUSB device on the ASR 1001 chassis. See xref figure, callout number 2.
Step 6
Remove the small Phillips screw holding the eUSB board in place. See the following figure.
Figure 258: Cisco ASR 1001 Router eUSB Device
1
Step 7
Gently pull the eUSB device up from its connector, and remove it.
Step 8
Place the eUSB device in an antistatic bag for return.
Cisco ASR 1000 Series Router Hardware Installation Guide
524
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
Cisco ASR 1001 router eUSB device Phillips screw
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1013
Related Products for Cisco ASR 1013
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1002-5G-SHA/K9 - ASR 1002 Sec+HA Bundle Router
- Cisco ASR1004-10G-SHA/K9 - ASR 1004 Sec+HA Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1006-10G-SEC/K9 - ASR 1006 VPN+FW Bundle Router
- Cisco ASR1006-10G-VPN/K9 - ASR 1006 VPN Bundle Router