Cisco ASR 1013 Hardware Installation Manual page 486
Asr 1000 series
Hide thumbs
Also See for ASR 1013:
- Installation manual (42 pages) ,
- Quick start manual (37 pages) ,
- Replacing (120 pages)
Table of Contents
Advertisement
Installing DC Input Power on the Cisco ASR 1001 Router
The power supply has a handle, to assist in insertion and extraction. The module must be supported with one
hand because of its length. The following image shows the rear view of the Cisco ASR 1001 Router DC power
supply.
Figure 220: Cisco ASR 1001 Router DC Power Supply Rear View
1
This section describes how to install the DC power supply ground leads and input power leads to the Cisco
ASR 1001 Router DC input power supply. Before you begin, read these important notices:
• The color coding of the DC input power supply leads depends on the color coding of the DC power
• Ensure that the chassis ground is connected on the chassis before you begin installing the DC power
When you install a power supply unit, the ground connection should always be made first and disconnected
Warning
last. Statement 1046
To connect the DC power supply on the Cisco ASDR 1001 Router, follow these steps:
SUMMARY STEPS
1. Ensure that the chassis ground is connected on the chassis before you begin installing the DC power supply,
as described in the
2. At the rear of the chassis, next to the power supply bay PS1, ensure that the power supply switch is in
Standby position.
3. Turn off the circuit breaker to the power supply.
Cisco ASR 1000 Series Router Hardware Installation Guide
452
DC power supply in slot
0
source at your site. Typically, green or green/yellow is used for ground (GND), black is used for –48 V
on the negative (–) terminal, and red is used for RTN on the positive (+) terminal. Ensure that the lead
color coding you choose for the DC input power supply matches the lead color coding used at the DC
power source.
supply. Follow the steps provided in the
Attaching a Chassis Ground Connection, on page
Cisco ASR 1001 Router Overview and Installation
2
Attaching a Chassis Ground Connection, on page
438.
DC power supply in slot
1
438.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco ASR 1013
Related Products for Cisco ASR 1013
- Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
- Cisco ASR1000-RP2 - ASR 1000 Series Route Processor 2 Router
- Cisco ASR1002-5G-SEC/K9 - ASR 1002 VPN+FW Bundle Router
- Cisco ASR1002-5G-SHA/K9 - ASR 1002 Sec+HA Bundle Router
- Cisco ASR1004-10G-SHA/K9 - ASR 1004 Sec+HA Bundle Router
- Cisco ASR1004-20G-SEC/K9 - ASR 1004 VPN+FW Bundle Router
- Cisco ASR1006-10G-SEC/K9 - ASR 1006 VPN+FW Bundle Router
- Cisco ASR1006-10G-VPN/K9 - ASR 1006 VPN Bundle Router