Cisco ASR 1013 Hardware Installation Manual page 378

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Four-Post Rack Installation

Use the second hole up from the bottom of the rack mount bracket and the second hole down from the top of

the rack mount bracket. This makes it easier to attach the cable management bracket to the chassis in the

equipment rack.

Hold the chassis in position against the mounting rails while the second person finger-tightens a screw to the rack rails

on each side of the chassis.

Tighten all the screws on each side to secure the chassis to the equipment rack (see the following image).

Figure 157: Cisco ASR 1002-X Router on a Four-Post Rack — Front and Rear Rack-Mounting

Use a level to verify that the tops of the two brackets are level, or use a measuring tape to verify that both the brackets

are the same distance from the top of the rack rails.

What to Do Next

This completes the procedure for installing the chassis in the rack. Proceed to the

Management Bracket, on page 345

Cisco ASR 1000 Series Router Hardware Installation Guide

Rear rack equipment rail

Rear rack mount bracket ear

for information about how to continue with the installation.

Cisco ASR 1002-X Router Overview and Installation

Front rack mount bracket ear

Front rack equipment rail

Attaching the Cable

Show Quick Links

Table of Contents

Troubleshooting