Cisco ASR 1013 Hardware Installation Manual page 376

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Two-Post Rack Installation

SUMMARY STEPS

1. Position the chassis such that the front is closest to you and lift it carefully into the rack.

2. Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both

sides of the rack.

3. Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the

holes on the rack or mounting strips.

4. For each bracket, insert and tighten two screws to the rack on both sides.

DETAILED STEPS

Position the chassis such that the front is closest to you and lift it carefully into the rack.

To prevent injury, avoid any sudden twists or

The following image shows where to attach the rack mount brackets to the Cisco ASR 1002-X Router.

Figure 156: Attaching the Rack Mount Brackets to the Cisco ASR 1002-X Router

Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on both sides of the

Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the holes on the rack

or mounting strips.

For each bracket, insert and tighten two screws to the rack on both sides.

Cisco ASR 1000 Series Router Hardware Installation Guide

Rack equipment rail

Cisco ASR 1002-X Router Overview and Installation

Rack mount bracket ear and

Show Quick Links

Table of Contents

Troubleshooting