Cisco ASR 1013 Hardware Installation Manual page 319

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Installation manual (42 pages)

Quick start manual (37 pages)

Replacing (120 pages)

Table of Contents

Cisco ASR 1002-F Router Overview and Installation

The following table defines the Cisco ASR 1002-F Router DC power supply LEDs on the Cisco ASR 1002-F

Table 64: Cisco ASR 1002-F Router DC Power Supply LEDs

Chassis ESD socket

DC power supply slot 0

DC power supply

Standby/On (|) switch

DC power supply LEDs

Power supply activity

Power supply fan status activity

Power supply activity

Power Supplies in the Cisco ASR 1002-F Router

Cisco ASR 1000 Series Router Hardware Installation Guide

Captive installation screw

DC power supply slot 1

Positive lead

Negative lead

The DC power supply input

voltage is greater than 43.5

VDC at turn-on and remains

green down to 39 VDC.

The power supply turns off due

to low input voltage (falls below

39VDC) and indicates that there

is still a hazard present (voltage

on the terminal block). The

LED remains amber and is

active to around 20 V +/-5 V.

The input is below 15V

All fans are operational.

A fan failure is detected.

The DC output is out of the

specified range. When you turn

the power supply on, the red

LED illuminates for two to

three seconds to test LED

operation before going off.

The DC output voltage are

within the normal operating

Show Quick Links

Quick Links:
Cisco Asr 1000 Series Routers Hardware...

Table of Contents

Troubleshooting

Cisco ASR 1013 Hardware Installation Manual page 319

Hide quick links:

Troubleshooting

Related Manuals for Cisco ASR 1013

Related Products for Cisco ASR 1013

This manual is also suitable for:

Table of Contents