Connecting Cables - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Cisco ASR 1002 Router Overview and Installation

DETAILED STEPS

Connect one end of the RJ-45 cables to the serial RJ-45 port (CON) on the Cisco embedded ASR1000-RP1 (see the

folliwng image).

Figure 114: Cisco ASR 1002 Router Console Port Connection on Cisco Embedded ASR1000-RP1

Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 cable to the RJ-45

adapter (see

Figure 114: Cisco ASR 1002 Router Console Port Connection on Cisco Embedded ASR1000-RP1, on page

Connect the adapter to your video terminal to complete the cable connection.

Power on your video terminal.

Configure your video terminal to match the following default console port settings:

• 8 data bits

• No parity generation or checking

• 1 stop bit

• No flow control

Go to the c_Connecting_Cables_1074149.xml to continue the installation.

Connecting Cables

Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002 Router:

• To reduce the chance of interference, avoid crossing high-power lines with any interface cables

CON port connection

Cisco ASR 1000 Series Router Hardware Installation Guide

Connecting Cables

AUX port connection

Show Quick Links

Table of Contents