Table of Contents
Advertisement
24
515
24.13 interface ip
Use the interface ip Global Configuration mode command to enter the IP Interface
Configuration mode.
Syntax
ip-address
interface ip
Parameters
•
ip-address
—Specifies one of the IP addresses of the device.
Command Mode
Global Configuration mode
Example
The following example enters the IP interface configuration mode.
switchxxxxxx(config)#
switchxxxxxx(config-ip)#
24.14 ip helper-address
Use the ip helper-address Global Configuration mode command to enable the
forwarding of UDP Broadcast packets received on an interface to a specific
(helper) address. Use the no form of this command to disable the forwarding of
broadcast packets to a specific (helper) address.
Syntax
ip-interface |
ip helper-address {
no ip helper-address {
Parameters
•
ip-interface
—Specifies the IP interface.
•
all—Specifies all IP interfaces.
192.168.1.1
interface ip
address
all}
ip-interface |
address
all}
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
IP Addressing Commands
udp-port-list
[
]
Advertisement
Table of Contents
