Table of Contents
Advertisement
Authentication, Authorization and Accounting (AAA) Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
User Guidelines
Create a list by entering the aaa authentication enable
[method2...]
command where
list. The method argument identifies the list of methods that the authentication
algorithm tries, in the given sequence.
The default and list names created by this command are used with the
authentication
command.
All aaa authentication enable requests sent by the device to a RADIUS server
include the username $enabx$., where x is the requested privilege level.
All aaa authentication enable requests sent by the device to a TACACS+ server
include the username that is entered for login authentication.
The additional methods of authentication are used only if the previous method
returns an error, not if it fails. Specify none as the final method in the command line
to ensure that the authentication succeeds even if all methods return an error.
no aaa authentication enable
referenced.
Example
The following example sets the enable password for authentication for accessing
higher privilege levels.
switchxxxxxx(config)#
switchxxxxxx(config)#
switchxxxxxx(config-line)#
5.3
login authentication
The login authentication Line Configuration mode command specifies the login
authentication method list for a remote Telnet or console session. Use the no form
of this command to restore the default authentication method.
Syntax
login authentication {default |
no login authentication
list-name
is any character string used to name this
list-name
deletes list-name if it has not been
aaa authentication enable enable-list radius none
line console
enable authentication enable-list
list-name
}
list-name method1
enable
5
174
Advertisement
Table of Contents
