Connecting Ac Input Power To The Cisco Asr 1002-F Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Connecting AC Input Power to the Cisco ASR 1002-F Router

All Cisco ASR 1000 Series Router AC power supplies must be connected to a branch circuit that does

not exceed 20 A.

Read the safety warnings before you begin.

Never install an AC power module and a DC power module in the same chassis. Statement 1050

Installation of the equipment must comply with local and national electrical codes. Statement 1074

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the

absence of a suitably installed ground conductor. Contact the appropriate electrical inspection authority

or an electrician if you are uncertain that suitable grounding is available. Statement 1024

This unit might have more than one power supply connection. All connections must be removed to

de-energize the unit. Statement 1028

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than: AC power supplies 20 A and DC power supplies 30 A. Statement

Connecting AC Input Power to the Cisco ASR 1002-F Router

This section provides instructions for installing the AC power supply into the Cisco ASR 1002-F Router.

shows the AC power supply labels. The following image shows the Cisco ASR 1002-F Router AC power

Figure 137: Cisco ASR 1002-F Router AC Power Supply Labels

Cisco ASR 1000 Series Router Hardware Installation Guide

Chassis ESD socket

Cisco ASR 1002-F Router Overview and Installation

Show Quick Links

Table of Contents