Lldp Hold-Multiplier - Cisco 300 Series Cli Manual
Stackable managed switches
Hide thumbs
Also See for 300 Series:
- Cli manual (899 pages) ,
- Administration manual (586 pages) ,
- Quick start manual (72 pages)
Table of Contents
Advertisement
30
645
Syntax
{mac-address | host-name}
lldp chassis-id
no lldp chassis-id
Parameters
•
mac-address—Specifies the chassis ID to use the device MAC address.
•
host-name—Specifies the chassis ID to use the device configured host
name.
Default Configuration
MAC address.
Command Mode
Global Configuration mode
User Guidelines
The host name should be configured to be a unique value.
If the chassis ID configured to be used in LLDP packets is empty, LLDP uses the
default chassis ID (specified above).
Example
The following example configures the chassis ID to be the MAC address.
switchxxxxxx(config)#
30.3 lldp hold-multiplier
To specify how long the receiving device holds a LLDP packet before discarding it,
use the lldp hold-multiplier Global Configuration mode command. To restore the
default configuration, use the no form of this command.
Syntax
lldp hold-multiplier
number
no lldp hold-multiplier
Link Layer Discovery Protocol (LLDP) Commands
lldp chassis-id mac-address
OL-32830-01 Command Line Interface Reference Guide
Advertisement
Table of Contents
