Show Ipv6 Mld Snooping Mrouter - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

The following example displays the MLD snooping configuration for VLAN 1000.

switchxxxxxx# show ipv6 mld snooping interface 1000

MLD Snooping is globally enabled

MLD Snooping Querier is globally enabled

MLD Snooping is enabled

MLD snooping last immediate leave: enable

Automatic learning of multicast router ports is enabled

MLD Snooping Querier is enabled

MLD Snooping Querier operation state: is running

MLD Snooping Querier version: 2

MLD Snooping Querier election is enabled

MLD snooping robustness: admin 2

MLD snooping query interval: admin 125 sec oper 125 sec

MLD snooping query maximum response: admin 10 sec oper 10 sec

MLD snooping last member query counter: admin 2 oper 2

MLD snooping last member query interval: admin 1000 msec oper 500 msec

Groups that are in MLD version 1 compatibility mode:

FF12::3, FF12::8

34.14 show ipv6 mld snooping mrouter

To display information on dynamically learned Multicast router interfaces for all

VLANs or for a specific VLAN, use the show ipv6 mld snooping mrouter EXEC

mode command in User EXEC mode.

show ipv6 mld snooping mrouter [interface

—(Optional) Specifies the VLAN ID.

OL-32830-01 Command Line Interface Reference Guide

MLD Snooping Commands