Qos Aggregate-Policer - Cisco 300 Series Cli Manual

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Quality of Service (QoS) Commands

OL-32830-01 Command Line Interface Reference Guide

permit-any—Forward all the packets (which were ingress of the port) that

do not meet the rules in a policy.

Command Mode

Interface (Ethernet, Port Channel) Configuration mode

Policy map is not bound.

User Guidelines

This command is only available in QoS advanced mode.

Only one policy map per interface per direction is supported.

The following example attaches a policy map called Policy1 to the input interface.

switchxxxxxx(config-if)# service-policy input

The following example attaches a policy map called Policy1 to the input interface

and forwards all packets that do not meet the rules of the policy.

switchxxxxxx(config-if)# service-policy input

39.14 qos aggregate-policer

Use the qos aggregate-policer Global Configuration mode command to define the

policer parameters that can be applied to multiple traffic classes. Use the no form

of this command to remove an existing aggregate policer.

qos aggregate-policer

committed-burst-byte

no qos aggregate-policer

aggregate-policer-name committed-rate-kbps

[exceed-action

aggregate-policer-name

policy1 permit-any