Server; Tcp-Tuning - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
server
Syntax Description
Usage Guidelines
Related Commands
tcp-tuning
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-102
Creates and/or configures the specified standard secure server and enters Server
Configuration mode for that server.
server <servname> [create]
no server <servname>
servname
create
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove a server. A device can have a total
of 255 (SCA) or 4095 (SCA2) servers in any combination of backend,
reverse-proxy, or standard secure servers. When a secure server has been specified
for removal, all connections are finished before the server is actually removed.
Server names can consist of Arabic numerals and upper- and lowercase
alphabetic, underscore (_), hyphen (-), and period (.) characters. Server names
must begin with an alphabetic character or underscore and have a limit of 15
characters.
show ssl server (Non-Privileged Command Set)
See the section "Server Configuration Command Set".
Enters TCP Tuning Configuration mode at the global level.
tcp-tuning
no tcp-tuning
The name of the logical secure server.
Creates a new logical secure server named polname
and enters Server Configuration mode for that server.
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
