Show Interface Statistics - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
Usage Guidelines
Related Commands
show interface statistics
Syntax Description
Usage Guidelines
78-13124-05
Availability: Serial, Telnet; FIPS Mode (serial only)
If a single interface is not specified, errors are displayed for both interfaces. If
continuous is specified, error statistics are updated every second. Use the interval
option to specify an interval for display updates. Press any key to stop displaying
errors.
show interface (Non-Privileged Command Set)
show interface statistics (Non-Privileged Command Set)
interface (Configuration Command Set)
See the section "Interface Configuration Command Set".
Displays interface statistics for the specified interface(s).
show interface statistics [network | server] [continuous] [interval
<value>]
network
server
continuous
interval
value
Availability: Serial, Telnet; FIPS Mode (serial only)
If a single interface is not specified, statistics are displayed for both interfaces. If
continuous is specified, statistics are updated every second. Use the interval
option to specify an interval for display updates. Press any key to stop displaying
statistics.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Displays information for the "Network" interface.
Displays information for the "Server" interface.
Displays statistics continuously.
Specifies an interval for display updates.
The interval in seconds.
Top Level Command Set
C-19
Advertisement
Table of Contents
Troubleshooting
