Show - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Command Set
Syntax Description
Usage Guidelines
show
Syntax Description
Usage Guidelines
Cisco 11000 Series Secure Content Accelerator Configuration Guide
D-16
network
server
Determine which interface to activate by the network location of the configuring
computer. If the configuring computer is located on the same network segment as
the "Server" port, activate the "Server" interface. If the configuring computer is
located on the same network segment as the "Network" port, activate the
"Network" interface. The behavior of the sbridge command used with no
arguments is as follows:
•
If one active Ethernet connection is found, that interface is used.
If two active Ethernet connections are found, neither interface is used.
•
•
If no active Ethernet connections are found, no interface is used.
Displays information for the specified system.
show [bridge|download|arp|route]
bridge
download
arp
route
If no system is specified, a help message is displayed.
Appendix D
Keyword indicating the "Network" Ethernet interface
should be activated.
Keyword indicating the "Server" Ethernet interface
should be activated.
Specifies bridge information is to displayed..
Specifies file download information is to be displayed.
Specifies ARP information is to be displayed.
Specifies route information is to be displayed.
MiniMax Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
