Maxrt; Maxseg - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
Usage Guidelines
maxrt
Syntax Description
Usage Guidelines
maxseg
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-172
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to return the max-rexmit to the global value. If
no global settings exist for a parameter, the factory default parameter is used
instead.
Specifies the amount of time a TCP connection will remain open after a peer stops
responding.
maxrt <seconds|forever|default>
no maxrt
seconds
forever
default
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to return the maxrt to the global value. If no
global settings exist for a parameter, the factory default parameter is used instead.
Specifies the maximum TCP segment size.
maxseg <bytes|default>
no maxseg
The number of number of seconds a TCP connection
will remain open after a peer stops responding; the
valid range is from 10 to 300 seconds (inclusive).
Keyword specifying the TCP connection is kept open
indefinitely.
The factory default. At the time of publication, the
factory default is 75 seconds.
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
