Certgroup Chain - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Configuration Command Set
Related Commands
certgroup chain
Syntax Description
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-146
Only one certificate is allowed per server. If you enter this command with a
different certificate, that reference replaces the earlier one.
certificate (SSL Configuration Command Set)
show ssl cert (Non-Privileged Command Set)
See also "Certificate Configuration Command Set".
Enables the specified certificate group to be used as a certificate chain. The no
form of the command is used to disable certificate chaining.
certgroup chain certgroupname
no certgroup chain
certgroupname
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove a certificate group association. When
using the no flag, you need not specify any certificate group name. Only one
certificate chain is allowed.
certgroup (SSL Configuration Command Set)
show ssl certgroup (Non-Privileged Command Set)
See also "Certificate Group Configuration Command Set".
The name of the certificate group.
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
