Localport; Log-Url - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
localport
Syntax Description
Usage Guidelines
log-url
Syntax Description
Usage Guidelines
78-13124-05
Specifies the TCP service port through which non-secure connections are
received.
localport <port|default>
port
default
Availability: Serial, Telnet; FIPS Mode (serial only)
Specifies a host for logging of URL requests.
log-url <ipaddr> [port <portid>] [facility <facilityid>]
no log-url <ipaddr>
ipaddr
port
portid
facility
facilityid
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to remove the specified log-url server from the
list. Only one log-url server can be configured.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The used to transfer non-secure traffic.
Sets the port specification to 80.
The IP address of the device to receive log-url
messages.
Keyword indicating that a specific TCP port should be
used for communications.
The TCP port to be used.
Keyword indicating a specific facility should be used.
A numeral (from 0 to 7, inclusive) specifying the
facility to be used.
Configuration Command Set
C-133
Advertisement
Table of Contents
Troubleshooting
